Alcatel-Lucent OmniSwitch 6800 Series - Ethernet Specifications; Ethernet Port Defaults (All Port Types)

Ethernet Specifications Configuring Ethernet Ports
page 37-2 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
Ethernet Specifications
Ethernet Port Defaults (All Port Types)
The following table shows Ethernet port default values:
IEEE Standards Supported 802.3 Carrier Sense Multiple Access with Collision Detection
(CSMA/CD)
802.3u (100BaseTX)
802.3ab (1000BaseT)
802.3z (1000Base-X)
802.3ae (10GBase-X)
Ports Supported Ethernet (10 Mbps)
Fast Ethernet (100 Mbps)
Gigabit Ethernet (1 Gb/1000 Mbps)
10 Gigabit Ethernet (10 Gb/10000 Mbps)
Switching/Routing Support Layer 2 Switching/Layer 3 Routing
Backbone Support Fast Ethernet, Gigabit Ethernet, and 10 Gigabit Ethernet ports
Port Mirroring Support Fast Ethernet and Gigabit Ethernet ports
802.1Q Hardware Tagging Fast Ethernet, Gigabit Ethernet, and 10 Gigabit Ethernet ports
Jumbo Frame Configuration Supported on Gigabit Ethernet and 10 Gigabit Ethernet ports
Maximum Frame Size 1553 bytes (10/100 Mbps)
9216 bytes (1/10 Gbps)
Parameter Description Command Default Value/Comments
Trap Port Link Messages trap port link Disabled
Interface Configuration interfaces admin Up (Enabled)
Flood Only Rate Limiting interfaces flood rate Enable
Multicast Rate Limiting interfaces flood multicast Disable
Peak Flood Rate Configuration interfaces flood rate 4 Mbps (10 Ethernet)
49 Mbps (100 Fast Ethernet)
496 Mbps (1 Gigabit Ethernet)
997 Mbps (10 Gigabit Ethernet)
Interface Alias interfaces alias None configured
Inter-Frame Gap interfaces ifg 12 bytes
Maximum Frame Size interfaces max frame 1553 (untagged) Ethernet packets
1553 (tagged) Ethernet packets
9216 Gigabit Ethernet packets