802.1Q Specifications Configuring 802.1Q
page 15-2 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
802.1Q Specifications
Note. Up to 4093 VLANs can be assigned to a tagged port or link aggregation group. However, each
assignment counts as a single VLAN port association. Once the maximum number of VLAN port associa-
tions is reached, no more VLANs can be assigned to ports. For more information, see the chapter titled
Chapter 10, “Assigning Ports to VLANs.”
802.1Q Defaults Table
The following table shows the default settings of the configurable 802.1Q parameters.
802.1Q Defaults
IEEE Specification Draft Standard P802.1Q/D11 IEEE Standards for
Local And Metropolitan Area Network: Virtual
Bridged Local Area Networks, July 30, 1998
Maximum Number of Tagged VLANs per
Port
4093
Maximum Number of Untagged VLANs per
Port
One untagged VLAN per port.
Maximum Number of VLAN Port Associa-
tions
32768
Parameter Description Command Default Value/Comments
What type of frames accepted vlan 802.1q frame type Both tagged and untagged
frames are accepted
To Next Page
Loading...
