EasyManua.ls Logo

Alcatel-Lucent OmniSwitch 6800 Series - RDP Specifications; RDP Defaults

Alcatel-Lucent OmniSwitch 6800 Series
926 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RDP Specifications Configuring RDP
page 21-2 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
RDP Specifications
RDP Defaults
RFCs Supported RFC 1256–ICMP Router Discovery Messages
Router advertisements Supported
Host solicitations Only responses to solicitations supported in this
release.
Maximum number of RDP interfaces per
switch
One for each available IP interface configured
on the switch.
Advertisement destination addresses 224.0.0.1 (all systems multicast)
255.255.255.255 (broadcast)
Parameter Description CLI Command Default Value/Comments
RDP status for the switch ip router-discovery Disabled
RDP status for switch interfaces
(router VLAN IP addresses)
ip router-discovery
interface
Disabled
Advertisement destination address
for an active RDP interface.
ip router-discovery
interface advertise-
ment-address
All systems multicast (224.0.0.1)
Maximum time between advertise-
ments sent from an active RDP inter-
face
ip router-discovery
interface max-adver-
tisement-interval
600 seconds
Minimum time between advertise-
ments sent from an active RDP inter-
face
ip router-discovery
interface min-adver-
tisement-interval
450 seconds
(0.75 * maximum advertisement interval)
Maximum time IP addresses con-
tained in an advertisement packet are
considered valid
ip router-discovery
interface advertise-
ment-lifetime
1800 seconds
(3 * maximum advertisement interval)
Preference level for IP addresses
contained in an advertisement packet
ip router-discovery
interface preference-
level
0

Table of Contents

Other manuals for Alcatel-Lucent OmniSwitch 6800 Series

Related product manuals