Configuring 802.1Q Configuring an 802.1Q VLAN
OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008 page 15-7
Show 802.1Q Information
After configuring a port or link aggregation group to be a tagged port, you can view the settings by using
the show 802.1q command, as demonstrated:
-> show 802.1q 3/4
Acceptable Frame Type : Any Frame Type
Force Tag Internal : NA
Tagged VLANS Internal Description
-------------+-------------------------------------------------+
2 TAG PORT 3/4 VLAN 2
-> show 802.1q 2
Tagged VLANS Internal Description
-------------+-------------------------------------------------+
3 TAG AGGREGATE 2 VLAN 3
To display all VLANs, enter the following command:
-> show vlan port
To Next Page
Loading...
