QoS Defaults Configuring QoS
page 30-10 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
QoS Defaults
The following tables list the defaults for global QoS parameters, individual port settings, policy rules, and
default policy rules.
Global QoS Defaults
Use the qos reset command is to reset global values to their defaults.
Description Command Default
QoS enabled or disabled qos enabled
Global default queuing scheme
for ports
qos default servicing mode strict priority queuing
Whether ports are globally
trusted or untrusted
qos trust ports 802.1Q-tagged ports and mobile
ports are always trusted; any
other port is untrusted
Statistics interval qos stats interval 60 seconds
Global bridged disposition qos default bridged disposition accept
Global routed disposition qos default routed disposition accept
Global multicast disposition qos default multicast disposition accept
Level of log detail qos log level 6
Number of lines in QoS log qos log lines 256
Whether log messages are sent
to the console
qos log console no
Whether log messages are avail-
able to OmniVista applications
qos forward log no
Whether IP anti-spoofing is
enabled on UserPorts.
(Not supported on OmniSwitch
6800.)
qos user-port filter yes
Whether a UserPorts port is
administratively disabled when
unwanted traffic is received.
(Not supported on OmniSwitch
6800.)
qos user-port shutdown no
Automatic NMS traffic prioriti-
zation. (Not supported on
OmniSwitch 6800.)
qos nms priority enabled
Priority for IP Phone connec-
tions. (Not supported on
OmniSwitch 6800.)
qos phones trusted
Type of messages logged qos quarantine path info
To Next Page
Loading...
Need help?
General
