Alcatel-Lucent OmniSwitch 6800 Series - Verifying the AVLAN Configuration

Configuring Authenticated VLANs Verifying the AVLAN Configuration
OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008 page 26-37
Verifying the AVLAN Configuration
To verify the authenticated VLAN configuration, use the following show commands:
For more information about these commands, see the OmniSwitch CLI Reference Guide.
show aaa authentication vlan Displays information about authenticated VLANs and the server config-
uration.
show aaa accounting vlan Displays information about accounting servers configured for Authenti-
cated VLANs.
show avlan user Displays MAC addresses for authenticated VLAN users on the switch.
show aaa avlan config Displays the current global configuration for authenticated VLANs.
show aaa avlan auth-ip Displays the IP addresses for authenticated VLANs.