OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008 page -xxxv
About This Guide
This OmniSwitch 6800/6850/9000 Network Configuration Guide describes how to set up and monitor
software features that will allow your switch to operate in a live network environment. The software
features described in this manual are shipped standard with your OmniSwitch 6800 Series, OmniSwitch
6850 Series, and OmniSwitch 9000 Series switches. These features are used when setting up your
OmniSwitch in a network of switches and routers.
Supported Platforms
The information in this guide applies to the following products:
• OmniSwitch 9600
• OmniSwitch 9700
• OmniSwitch 9800
• OmniSwitch 6800 Series
• OmniSwitch 6850 Series
Note. This OmniSwitch CLI Reference Guide covers Release 6.3.1, which is supported on the OmniSwitch
6800 Series, OmniSwitch 6850 Series, and OmniSwitch 9000 Series switches. OmniSwitch 6600 Family,
OmniSwitch 7700/7800, and OmniSwitch 8800 switches use Release 5.x. Please refer to the 5.x user
guides for those switches.
Unsupported Platforms
The information in this guide does not apply to the following products:
• OmniSwitch (original version with no numeric model name)
• OmniSwitch 6600 Family
• OmniSwitch 7700/7800
• OmniSwitch 8800
• Omni Switch/Router
• OmniStack
• OmniAccess
To Next Page
Loading...
