QoS Specifications Configuring QoS
page 30-2 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
QoS Specifications
Note. The QoS functionality described in this chapter is supported on the OmniSwitch 6800, 6850, and
9000 switches unless otherwise stated in the QoS Specifications table or specifically noted within any
other section of this chapter.
The following table contains information regarding standards, limitations, and guidelines that apply to this
implementation of the QoS feature. Note that any maximum limits provided in this table are subject to
available system resources.
Maximum number of configurable policy rules 2048
Maximum number of policy conditions 2048
Maximum number of policy actions 2048
Maximum number of policy services 256
Maximum number of groups (network, MAC, ser-
vice, port)
1024
Maximum number of group entries 1024 per group
Maximum number of rules per slot 1664 (OmniSwitch 6850 and 9000 only)
Maximum number of bandwidth shaping rules per
slot
832 (OmniSwitch 6850 and 9000 CMM only)
Maximum number of policy rules per Ethernet port 101 (OmniSwitch 6800 only)
Maximum number of policy rules per 10 Gigabit
port
997 (OmniSwitch 6800 only)
Maximum number of priority queues per port 8 (Note that two of the eight queues on
OmniSwitch 6800 QoS ports are reserved for
internal use only, so they are not available.)
CLI Command Prefix Recognition Some QoS commands support prefix recognition.
See the “Using the CLI” chapter in the
OmniSwitch 6800/6850/9000 Switch Manage-
ment Guide for more information.
To Next Page
Loading...
