Alcatel-Lucent OmniSwitch 6800 Series - Removing an LDAP Authentication Server; Verifying the Authentication Server Configuration

Managing Authentication Servers Verifying the Authentication Server Configuration
OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008 page 25-29
Removing an LDAP Authentication Server
To delete an LDAP server from the switch configuration, use the no form of the command with the rele-
vant server name.
-> no aaa ldap-server topanga5
The topanga5 server is removed from the configuration.
Verifying the Authentication Server Configuration
To display information about authentication servers, use the following command:
An example of the output for this command is given in “Quick Steps For Configuring Authentication
Servers” on page 25-4. For more information about the output of this command, see the OmniSwitch CLI
Reference Guide.
show aaa server Displays information about a particular AAA server or AAA servers.