Alcatel-Lucent OmniSwitch 6800 Series - Verifying the 802.1 X Port Configuration

Verifying the 802.1X Port Configuration Configuring 802.1X
page 27-20 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
Verifying the 802.1X Port Configuration
A summary of the show commands used for verifying the 802.1X port configuration is given here:
For more information about the displays that result from these commands, see the OmniSwitch CLI Refer-
ence Guide.
show 802.1x Displays information about ports configured for 802.1X.
show 802.1x users Displays a list of all users (supplicants) for one or more 802.1X ports.
show 802.1x non-supplicant Displays a list of all non-802.1x users (non-supplicants) learned on one
or more 802.1x ports.
show 802.1x statistics Displays statistics about 802.1X ports.
show 802.1x device
classification policies
Displays Access Guardian 802.1x device classification policies config-
ured for 802.1x ports.
show aaa authentication 802.1x Displays information about the global 802.1X configuration on the
switch.
show aaa accounting 802.1x Displays information about accounting servers configured for 802.1X
port-based network access control.
show aaa authentication mac Displays a list of RADIUS servers configured for MAC based authenti-
cation.