Alcatel-Lucent OmniSwitch 6800 Series - Policy Server Specifications; Policy Server Defaults

Policy Server Specifications Managing Policy Servers
page 29-2 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
Policy Server Specifications
The following table lists important information about LDAP policy servers:
Policy Server Defaults
Defaults for the policy server command are as follows:
LDAP Policy Servers
RFCs Supported
RFC 2251–Lightweight Directory Access Protocol (v3)
RFC 3060–Policy Core Information Model—Version 1
Specification
Maximum number of policy servers
(supported on the switch)
4
Maximum number of policy servers
(supported by PolicyView)
1
Description Keyword Default
The port number for the server port 389 (SSL disabled)
636 (SSL enabled)
Priority value assigned to a server, used to
determine search order
preference 0 (lowest)
Whether a Secure Socket Layer is configured
for the server
ssl | no ssl no ssl