Alcatel-Lucent OmniSwitch 6800 Series - Page 32

xxxii OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
Switch Logging Commands Overview .........................................................................36-6
Enabling Switch Logging .......................................................................................36-6
Setting the Switch Logging Severity Level ............................................................36-6
Specifying the Severity Level .........................................................................36-8
Removing the Severity Level ..........................................................................36-9
Specifying the Switch Logging Output Device ......................................................36-9
Enabling/Disabling Switch Logging Output to the Console ...........................36-9
Enabling/Disabling Switch Logging Output to Flash Memory .......................36-9
Specifying an IP Address for Switch Logging Output ....................................36-9
Disabling an IP Address from Receiving Switch Logging Output ...............36-10
Displaying Switch Logging Status .......................................................................36-10
Configuring the Switch Logging File Size ...........................................................36-11
Clearing the Switch Logging Files .......................................................................36-11
Displaying Switch Logging Records ....................................................................36-12
Chapter 37 Configuring Ethernet Ports ....................................................................................37-1
In This Chapter ..............................................................................................................37-1
Ethernet Specifications ..................................................................................................37-2
Ethernet Port Defaults (All Port Types) ........................................................................37-2
Non-Combo Port Defaults .............................................................................................37-3
Combo Ethernet Port Defaults ......................................................................................37-3
Ethernet Ports Overview ...............................................................................................37-4
OmniSwitch 6800 and 6850 Series Combo Ports ..................................................37-4
Valid Port Settings on OmniSwitch 6800 Series Switches ....................................37-5
Valid Port Settings on OmniSwitch 6850 Series Switches ....................................37-5
Valid Port Settings on OmniSwitch 9000 Series Switches ....................................37-6
10/100/1000 Crossover Supported .........................................................................37-7
Autonegotiation Guidelines ....................................................................................37-7
Setting Ethernet Parameters for All Port Types ............................................................37-8
Setting Trap Port Link Messages ...........................................................................37-8
Enabling Trap Port Link Messages .................................................................37-8
Disabling Trap Port Link Messages ................................................................37-8
Resetting Statistics Counters ..................................................................................37-9
Enabling and Disabling Interfaces .........................................................................37-9
Configuring Flood Rate Limiting .........................................................................37-10
Flood Only Rate Limiting .............................................................................37-10
Multicast Flood Rate Limiting ......................................................................37-11
Configuring the Peak Flood Rate Value ........................................................37-11
Configuring a Port Alias ......................................................................................37-12
Configuring Maximum Frame Sizes ....................................................................37-13
Setting Ethernet Parameters for Non-Combo Ports ....................................................37-14
Setting Interface Line Speed ................................................................................37-14
Configuring Duplex Mode ...................................................................................37-15
Configuring Inter-frame Gap Values .............................................................37-15
Configuring Autonegotiation and Crossover Settings .........................................37-16
Enabling and Disabling Autonegotiation ......................................................37-16
Configuring Crossover Settings ....................................................................37-17