Alcatel-Lucent OmniSwitch 6800 Series - Page 512

RADIUS Servers Managing Authentication Servers
page 25-10 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
19
20
21
22
23
Callback-Number
Callback-Id
Unassigned
Frame-Route
Framed-IPX-Network
Not supported. These attributes are used for dial-up sessions;
not applicable to the RADIUS client in the switch.
24 State Sent in challenge/response packets.
25 Class Used to pass information from the server to the client and
passed unchanged to the accounting server as part of the
accounting-request packet.
26 Vendor-Specific See “Vendor-Specific Attributes for RADIUS” on
page 25-11.
27 Session-Timeout Not supported.
28 Idle-Timeout Not supported.
29
30
31
32
33
34
35
36
37
38
39
60
61
62
63
Termination-Action
Called-Station-Id
Calling-Station-Id
NAS-Identifier
Proxy-State
Login-LAT-Service
Login-LAT-Node
Login-LAT-Group
Framed-AppleTalk-Link
Framed-AppleTalk-Network
Framed-AppleTalk-Zone
CHAP-Challenge
NAS-Port-Type
Port-Limit
Login-LAT-Port
Not supported. These attributes are used for dial-up sessions;
not applicable to the RADIUS client in the switch.
Num. Standard Attribute Notes