EasyManua.ls Logo

Alcatel-Lucent OmniSwitch 6800 Series - Page 796

Alcatel-Lucent OmniSwitch 6800 Series
926 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Displaying Server Load Balancing Status and Statistics Configuring Server Load Balancing
page 34-36 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
The show ip slb cluster server command provides detailed configuration information and statistics for
individual SLB servers. To use the show ip slb cluster server command, enter the command, the name of
the SLB cluster that the server belongs to, server, and the IP address of the server. For example, to display
statistics and parameters for a server with an IP address of 10.123.11.14 that belongs to an SLB cluster
called “Web_Server” you would enter:
-> show ip slb cluster Web_Server server 10.123.11.14
A screen similar to the following will be displayed:
Cluster Web_Server
VIP: 10.123.11.14
Server 10.123.11.4
MAC addr : 00:00:1f:40:53:6a,
Slot number = 1,
Port number = 4,
Admin status : Enabled,
Oper status : In Service,
Availability time (%) = 95,
Ping failures = 0,
Last ping round trip time (milliseconds)= 20,
Probe status = ,
In the example above, the server with an IP address of 10.123.11.4 is shown to be administratively enabled
and “in service” (i.e., this server is being used for SLB cluster client connections).
The show ip slb probes command provides both a global view of SLB probes and a detailed configura-
tion information and statistics for individual probes. For example, to view the status of all probes enter
show ip slb probes as shown below:
-> show ip slb probes
Probe Name Period Retries Timeout Method
-----------------------+-------+-------+--------+------
web_server 60000 3 12000 HTTP
mail_server 60000 3 3000 SMTP
mis_servers 3600000 5 24000 Ping
In the example above there are three probes configured on the switch.
To view detailed information on a single probe enter show ip slb probes followed by the probe name as
shown in the example below:
-> show ip slb probes phttp
Probe phttp
Type = HTTP,
Period (seconds) = 60,
Timeout (milliseconds) = 3000,
Retries = 3,
Port = 0,
Username = ,
Password = ,
Expect = ,
Status = 200,
URL = /,

Table of Contents

Other manuals for Alcatel-Lucent OmniSwitch 6800 Series

Related product manuals