Alcatel-Lucent OmniSwitch 6800 Series - Page 913

OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008 Index-1
Index
qos log lines command 18-19
qos port servicing mode command 18-26
qos stats interval command 18-23
Numerics
10 Gigabit Ethernet
see Ethernet
10/100/1000 ports
defaults 25-3
802.1AB 1-1
defaults 1-2
specifications 1-2
verify information about 1-11
802.1p
trusted ports 18-27
802.1Q 3-1
application examples 3-8
defaults 3-2
enabling notification 1-7
enabling tagging 3-5
frame type 3-6
overview 3-3
specifications 3-2
trusted ports 18-5, 18-28
verify information about 3-10
802.1Q ports
trusted 18-28
802.1X 15-1
accounting 15-9
and DHCP 15-8
components 15-7
defaults 15-2
port authorization 15-12
port parameters 15-12
port timeouts 15-12
re-authentication 15-8, 15-13
specifications 15-2
802.1x command 15-2
802.1x initialize command 15-14
802.1x re-authenticate command 15-14
802.3ad
see dynamic link aggregation
A
aaa accounting 802.1x command 15-14
aaa accounting vlan command 14-32, 14-35
aaa ace-server clear command 13-8
aaa authentication 802.1x command 15-11
and 802.1X port behavior 15-8
aaa authentication vlan multiple-mode command 14-32
aaa authentication vlan single-mode command 14-32
aaa avlan default dhcp command 14-31
aaa avlan dns command 14-29
aaa avlan http language command 14-8
aaa ldap-server command
LDAP authentication 13-27
aaa radius-server command 15-11
RADIUS authentication 13-14, 13-16
aaa vlan no command 14-26
Access Control Lists
see ACLs
access list 8-15
creating 8-15
accounting servers 14-35
ACE/Server
for authentication 13-8
ACLs
application examples 16-3, 16-4, 19-4, 19-22
bridged traffic 19-6
defaults 16-2, 19-3
disposition 19-5, 19-7
interaction with VRRP 11-10, 11-19
Layer 2 19-11
Layer 2 application examples 19-12
Layer 3 19-12
Layer 3 application examples 19-13
multicast 19-14
security features 19-16
verify information about 16-22, 19-20
actions
combined with conditions 18-8, 18-9
creating policy actions 18-34
for ACLs 19-10
Address Resolution Protocol
see ARP
advertisements 9-6
destination address 9-9
IP address preference 9-10
lifetime 9-10
transmission interval 9-9
Alcatel Mapping Adjacency Protocol 2-1
alerts 24-8
AMAP
see Alcatel Mapping Adjacency Protocol
amap common time command 2-6
amap disable command 2-5
amap discovery time command 2-5
amap enable command 2-5
Application example
Learned Port Security Configuration 4-3
application example
Ethernet OAM 9-6
MST 3-14
MSTI 3-16
VLAN Stacking 6-2, 6-34
application examples
802.1Q 3-8
ACLs 16-3, 16-4, 19-4