Alcatel-Lucent OmniSwitch 6800 Series - Page 922

page -10 OmniSwitch 6800/6850/9000 Network Configuration Guide March 2008
standard attributes 13-9
used for 802.1X 15-7
VSAs 13-11
Rapid Spanning Tree Algorithm and Protocol
see RSTP
RDP 9-1, 9-5
advertisement destination address 9-9
advertisement interval 9-9
advertisement lifetime 9-10
application examples 9-3
defaults 9-2
disable 9-8
enable 9-8
example 9-5
interface 9-6
IP address preference 9-10
security 9-7
specifications 9-2
verify information about 9-11
RDP interface 9-6
defaults 9-8
re-authentication
802.1X 15-8
Redirection Policies 18-59
Remote Authentication Dial-In User Service
see RADIUS authentication servers
resource threshold limits
configuring 23-43
Ring Rapid Spanning Tree Algorithm and Protocol
see RRSTP
RIP 8-1, 12-5
application examples 8-3
defaults 8-2
enabling 8-7
forced hold-down timer 8-9
garbage timer 8-10
hold-down timer 8-10
host route 8-11
interface 8-7
invalid timer 8-10
IP 8-4
loading 8-6
redistribution 8-12
security 8-18
specifications 8-2
unloading 8-6
update interval 8-9
verification 8-19
verify information about 8-19
RIP interface
creating 8-7
deleting 8-7
enabling 8-7
metric 8-8
password 8-18
receive option 8-8
route tag 8-9
send option 8-7
RMON
application examples 23-11
defaults 23-11
specifications 23-10
RMON events
displaying list 23-40
displaying specific 23-40
RMON probes
displaying list 23-37
displaying statistics 23-38
enabling/disabling 23-36
rmon probes command 23-36
RMON tables
displaying 23-37
route map
creating 8-13
deleting 8-14
enabling/disabling administrative status 8-16
redistribution 8-16
sequencing 8-14
Router Discovery Protocol
see RDP
router ID 6-15, 7-17
router port
IP 6-8
IPX 12-6
router primary address 6-15
Routing Information Protocol
see RIP
RRSTP 8-39
configuration 8-40
defaults 8-5
RSTP 8-6
port connection types 8-36
rules
see policies
S
sampling intervals
configuring 9-10, 23-45
viewing 23-45
SAP 12-5
Secure Socket Layer
see SSL
security 9-7
Security Violation Mode 4-11
restrict mode 4-11
shutdown mode 4-11
Sequenced Packet Exchange
see SPX
server clusters 22-24, 22-29
server farms 22-10
Server Load Balancing 22-1
adding servers 22-26
application examples 22-4
clusters 22-24, 22-29
configuration steps 22-23
defaults 22-3