118 of 220 Printer Output - Anatel A643a
RPS - June 2007 - Edition 12
Operator Manual Anatel
4) Use the Up and Down Keys to specify the desired Printout function.
5) Press Enter to generate the specified output. The information in both Printouts is
preceded by the following Analyzer-specific header data:
6) Press Esc repeatedly to exit this function and return to the normal display.
TOC Printout “TOC Calibration” on page 82
TOC Validation “TOC Validation” on page 87
Conductivity Calibration “Conductivity Calibration” on page 91
System Suitability “System Suitability” on page 95
Fig 8-8 : Printouts Screen
Model
Serial Number
Channel ID Number
User-entered Name
Current Date and Time
To Next Page
Loading...
