ANATEL A643a User Manual

Anatel A643a - Calibration and Validation 99 of 220
RPS - June 2007 - Edition 12
Anatel Operator Manual
6.6 Data History
The results of Anatel A643a calibration and validation procedures are available for review or
printout at any time through the Data History Menu.
To access saved data:
1) With the desired Analyzer selected in any View, press the Manual Key to access its
menu selections.
2) Use the Up and Down Keys to specify Calibrations.
3) Press Enter to display its submenu.
4) Use the Up and Down Keys to specify Data History and press Enter.
5) Choose the desired test category (Validation, System Suitability, TOC Calibration or
Conductivity Calibration) and the test type (Last Accepted or Last Done). Press
Enter to display it.
Note:
Data History screens and printouts are identical to those produced during the calibration/
validation; refer to the appropriate procedure in this Section.
Fig 6-31 : Data History
Show Validate:
Show Suitabil:
X
Show TOC Cal:
Show Cond Cal:
Fig 6-32 : Show TOC Cal
Show TOC Cal
X Last Accepted:
Last Done:
Fig 6-33 : Last Accepted

ANATEL A643a Specifications

General

Brand	ANATEL
Model	A643a
Category	Measuring Instruments
Language	English