ANATEL A643a User Manual

Anatel A643a - Anatel A643a Setup 73 of 220
RPS - June 2007 - Edition 12
Anatel Operator Manual
Note:
Conductivity is shown as “COND uS/cm” if it is temperature compensated.
To specify a Purge Print interval:
1) With the desired instrument selected in any View, press the Setup Key to display its
submenu.
2) Use the Up and Down Keys to specify Sensor Setup.
3) Press Enter to access its submenu.
4) Specify Display/Print from among the available selections and press Enter to display
its options.
5) Select Printer Setup and press Enter.
6) Specify Purge Print and press Enter.
7) Use the Up and Down Keys to specify one of the two Purge Print outputs:
Fig 5-38 : Purge Printout
1 SENSOR NAME
X Timed
Paper Saver:
Disabled
Fig 5-39 : Purge Print Outputs

ANATEL A643a Specifications

General

Brand	ANATEL
Model	A643a
Category	Measuring Instruments
Language	English