Anatel A643a - Introduction 15 of 220
RPS - June 2007 - Edition 12
Anatel Operator Manual
Fig 1-2 : A-Net RS-485 Local Area Network
1.2 Anatel A643a Analyzer Features
Anatel A643a TOC Analyzers offer several unique advantages in the monitoring of ultrapure
water systems:
Calibration and
Validation
The Anatel A643a Analyzer can be calibrated with from one to three
TOC standards using Anatel’s pre-packaged Calibration Standards.
Calibration and instrument performance can be validated on-line using
Anatel’s Validation Kit.
USP Compliance for
Conductivity and
System Suitability
The Anatel A643a’s limit response and response efficiency are
calculated on-line automatically to determine compliance with USP
TOC Method <643>. Meter accuracy and cell constant also can be
verified on-line to comply with USP Conductivity Method <645>.
Hot Water
Application
The Anatel A643a is fully compatible with water temperatures up to
65 °C. For water temperatures from 65 °C to 95 °C, a heat exchanger
is required. The only wetted part in the Anatel Heat Exchanger is 316
stainless steel tubing.
To Next Page
Loading...
Need help?
General
