ANATEL A643a - Accessories; Thermal Printer; Fig B-4: Thermal Printer; B.2.1 Thermal Printer

Anatel A643a - Specifications and Accessories 197 of 220
RPS - June 2007 - Edition 12
Anatel Operator Manual
B.2 Accessories
B.2.1 Thermal Printer
Note:
P/N FG2009401
The Seiko Instruments Model DPU-414 Type II is a 40-column thermal printer. It can operate
as a standalone reporting device with the Anatel A643a–S and is integrated into the design of
the Anatel A643a–P.
The Anatel A643a–P printer’s onboard NiCad battery is not field-replaceable: contact Anatel for
replacement. The battery can be recharged, however, by turning the printer “OFF” and the A-
643a–P “ON” for eight hours.
Fig B-4 : Thermal Printer
Print
Method: Thermal Serial Dot-Matrix
Format: 9 dots high x 7 dots wide
Speed: 52.5 characters per second (cps)
Width: 89.6 mm
Paper Size: 112 mm, 40-column
Buffer: 7400 characters
Physical
Temperature Range: 0 °C to 40 °C (32 °C to 104 °C)
Humidity: 30 to 80% RH (non-condensing)
Power (via wall transformer): 120 VAC, 60 Hz Standard
230 VAC, 50 Hz Optional
NiCad Battery (643P only): 4.8 VDC, 1.5 Amp
Maximum Power Consumption: Negligible