Atmel AVR XMEGA AU series User Manual

44
8331B–AVR–03/12
Atmel AVR XMEGA AU
4.17.25 TEMPSENSE1 – Temperature Sensor Calibration register 1
• Bit 7:0 – TEMPSENSE1[7:0]: Temperature Sensor Calibration Byte 1
This byte contains byte 1 of the temperature measurement.
4.17.26 DACA0OFFCAL – DACA Offset Calibration register
• Bit 7:0 – DACA0OFFCAL[7:0]: DACA0 Offset Calibration Byte
This byte contains the offset calibration value for channel 0 in the digital to analog converter A
(DACA). Calibration is done during production test of the device. The calibration byte is not
loaded automatically into the DAC channel 0 offset calibration register, so this must be done
from software.
4.17.27 DACA0GAINCAL – DACA Gain Calibration register
• Bit 7:0 – DACA0GAINCAL[7:0]: DACA0 Gain Calibration Byte
This byte contains the gain calibration value for channel 0 in the digital to analog converter A
(DACA). Calibration is done during production test of the device. The calibration byte is not
loaded automatically into the DAC gain calibration register, so this must be done from software.
4.17.28 DACB0OFFCAL – DACB Offset Calibration register
• Bit 7:0 – DACB0OFFCAL[7:0]: DACB0 Offset Calibration Byte
This byte contains the offset calibration value for channel 0 in the digital to analog converter B
(DACB). Calibration is done during production test of the device. The calibration byte is not
Bit 7654 3 2 1 0
+0x2F TEMPSENSE1[7:0] TEMPSENSE1
Read/Write R R R R R R R R
Initial Value 0 0 0 0 x x x x
Bit 7654 3 2 1 0
+0x30 DACA0OFFCAL[7:0] DACA0OFFCAL
Read/Write R R R R R R R R
Initial Value 0 0 0 0 x x x x
Bit 76543 210
+0x31 DACA0GAINCAL[7:0] DACA0GAINCAL
Read/Write R R R R R R R R
Initial Value 0 0 0 0 x x x x
Bit 7654 3 2 1 0
+0x32 DACB0OFFCAL[7:0] DACB0OFFCAL
Read/Write R R R R R R R R
Initial Value 0 0 0 0 x x x x

Atmel AVR XMEGA AU series Specifications

General

Brand	Atmel
Model	AVR XMEGA AU series
Category	Microcontrollers
Language	English