Page 4–14
DURApulse GS4 AC Drive User Manual – 1st Ed, Rev A - 10/20/2017
Chapter 4: AC Drive Parameters
Presets ParaMeters suMMary (P5.xx)
For detailed information about the P5.xx parameter group, please refer to page 4–123.
GS4 Parameters Summary – Presets Parameters (P5.xx)
Parameter Range
Run
1)
Read/
Write
Modbus
Address
Settings
Hex Dec Default
2)
User
1) ♦ in the Run-Read/Write column indicates that the parameter can be set during RUN mode.
R/W indicates “read/write.”
Read indicates “read-only.”
2) Parameters can be restored to their default values using P9.08.
P5.00
Jog Frequency 0�00~600�00 Hz ♦R/W 0500 41281 6�0
P5.01
Multi-Speed 1 0�00~600�00 Hz ♦R/W 0501 41282 0�0
P5.02
Multi-Speed 2 0�00~600�00 Hz ♦R/W 0502 41283 0�0
P5.03
Multi-Speed 3 0�00~600�00 Hz ♦R/W 0503 41284 0�0
P5.04
Multi-Speed 4 0�00~600�00 Hz ♦R/W 0504 41285 0�0
P5.05
Multi-Speed 5 0�00~600�00 Hz ♦R/W 0505 41286 0�0
P5.06
Multi-Speed 6 0�00~600�00 Hz ♦R/W 0506 41287 0�0
P5.07
Multi-Speed 7 0�00~600�00 Hz ♦R/W 0507 41288 0�0
P5.08
Multi-Speed 8 0�00~600�00 Hz ♦R/W 0508 41289 0�0
P5.09
Multi-Speed 9 0�00~600�00 Hz ♦R/W 0509 41290 0�0
P5.10
Multi-Speed 10 0�00~600�00 Hz ♦R/W 050A 41291 0�0
P5.11
Multi-Speed 11 0�00~600�00 Hz ♦R/W 050B 41292 0�0
P5.12
Multi-Speed 12 0�00~600�00 Hz ♦R/W 050C 41293 0�0
P5.13
Multi-Speed 13 0�00~600�00 Hz ♦R/W 050D 41294 0�0
P5.14
Multi-Speed 14 0�00~600�00 Hz ♦R/W 050E 41295 0�0
P5.15
Multi-Speed 15 0�00~600�00 Hz ♦R/W 050F 41296 0�0
To Next Page
Loading...
Need help?
General
