Bernina 790 - Page 10

Contents
11
Connecting stitches 143
Upper thread 143
Bobbin thread 143
Tear-away stabilizers 144
Cut-away stabilizers 144
11.4
Overview Embroidery functions 144
11.5
Embroidering preparation 145
Attaching the Embroidery foot No. 26 145
Selecting the Embroidery foot No. 26 145
Inserting the embroidery needle 146
Selecting the needle 146
Selecting needle type and needle size 147
Attaching the stitch plate CutWork/Straight 147
Selecting the stitch plate CutWork/Straight 148
Attaching the Module 148
Preparing the embroidery hoop 149
Using adhesive spray 150
Using spray starch 150
Using iron-on interfacing 150
Using paper-backed adhesive stabilizer 150
Using water-soluble stabilizer 151
Attaching the hoop 151
11.6
Selecting an embroidery motif 151
11.7
Embroidery hoop 152
Overview Embroidery hoop selection 152
Changing the upper thread in the embroidery mode 153
Changing the bobbin thread in Embroidery mode 153
Sewing with connected embroidery module 153
Activating the grid 154
Locating the center of the embroidery motif 154
Relocating the hoop 154
11.8
Editing the embroidery motif 155
Overview Editing embroidery motif 155
Monitoring the embroidery time 155
Adjusting the upper thread tension 156
Altering the view 156
Relocating the embroidery motif 157
Rotating the embroidery motif 157
Altering the size 157
Altering the size proportionally 157
Mirroring embroidery motifs 158
Bending text 158
Changing satin stitch to step stitch 158
Altering the stitch density 158
Checking the size of the embroidery motif 159
11.9
Combinations 159
Combining embroidery motifs 159
Duplicating the embroidery motif 160
Duplicating a combination 160
11.10
Administering embroidery motifs 161
035964.50.04_2014-08_Manual_B790_EN