Bernina 790 - Sewing Visible Hems; Sewing Flat Joining Seams

Practical stitches
108
5.19 Sewing visible hems
The visible hem is especially suitable for elastic hems in jersey, cotton, wool, synthetic and mixed fibers.
> Attach the Reverse pattern foot No. 1C/1D.
> Touch the icon «Practical stitches».
> Select Tricot stitch No. 14.
> Iron the hem and baste if necessary.
> Reduce the presser foot pressure if necessary.
> Sew the hem at the preferred depth on the right side.
> Trim the excess fabric from the wrong side.
5.20 Sewing flat joining seams
The flat joining seam is especially suitable for or thick materials such as terry cloth, felt and leather.
> Attach the Reverse pattern foot No. 1C.
> Touch the icon «Practical stitches».
> Select the Stretch overlock No. 13.
> Overlap the fabric edges.
> Sew along the fabric edge.
> The needle stitches over the edge of the top layer on the right side into the bottom layer to get a very flat
durable seam.
035964.50.04_2014-08_Manual_B790_EN