Bernina 790 - Embroidering Single Colors; Embroidering Via the Button Start;Stop

Embroidery
167
> Touch the icon «Multi-colored embroidery motif on/off».
Embroidering single colors
Every color of an embroidery motif can be selected individually. The hoop moves to the first stitch of the
current color. The currently active color can be embroidered individually or in another sequence. The
connecting stitches remain visible.
> Select an embroidery motif.
> Touch the icon «Embroidering».
> Touch the icon «Scrolling down» to select the next color of the embroidery motif.
> Touch the icon «Scrolling up» to select the previous color of the embroidery motif.
11.12 Embroidering via the button «Start/Stop»
> Push the button «Start/Stop» to start the embroidery machine.
– The embroidery machine embroiders ca. 7 stitches and stops automatically.
> Raise the Embroidery foot.
> Cut the thread ends at the start according to the animation.
> Push the button «Start/Stop» and resume embroidering.
– All parts of the motif being in the current color are embroidered.
– The embroidery machine stops automatically at the end.
– Both threads are cut automatically.
– The embroidery machine switches to the next color automatically.
> Change the upper thread.
> Embroider the new color.
> After completing the embroidery motif, finish the embroidering process by touching the icon «Finishing
the embroidering process» (1) or embroider the motif again by touching the icon «Endless embroidery»
(2).
1 2
035964.50.04_2014-08_Manual_B790_EN