144
• Fine mercerized cotton thread which is suitable for embroidery on cotton.
Tear-away stabilizers
Using a stabilizer ensures more stability of the embroidery project. A tear-away stabilizer suits all woven and
non-stretch materials. 1 – 2 layers can be used. Stabilizers are available in different weights. With larger
embroidered areas the stabilizer will remain under the thread. The stabilizer is applied to the wrong side of
the fabric with temporary adhesive spray before hooping. Carefully tear away excess stabilizer from the back
of the embroidery after stitching.
Cut-away stabilizers
Using a stabilizer ensure more stability of the embroidery project. A cut-away stabilizer is recommended for
fabrics with stretch. 1 – 2 layers can be used. Stabilizers are available in different weights. With larger
embroidered areas the stabilizer will remain under the thread. The stabilizer is applied to the wrong side of
the fabric with temporary adhesive spray before hooping. Carefully cut away excess stabilizer from the back
of the embroidery after stitching.
11.4 Overview Embroidery functions
1
2
3
4
5
6
7
8
9
10
11
1 Upper thread tension 7 Filling level of bobbin thread
2 Needle selection 8 Selection
3 Presser foot display/Presser foot selection 9 Editing
4 Embroidery hoop display/Embroidery hoop
selection
10 Colors
5 Stitch plate selection 11 Embroidery
6 Feed dog up/down
035964.50.04_2014-08_Manual_B790_EN
To Next Page
Loading...
