Bernina 790 - Deactivating the Thread Catcher; Programming the Automatic Thread Cut

Setup-Program
59
> Touch the icon «Embroidery settings».
> Touch the icon «Securing stitches on/off».
> Touch the switch in the upper right portion of the display to deactivate the securing stitches.
– No securing stitches will be sewn and the bobbin thread needs to be brought up manually and held
when embroidering is started.
> Touch the switch again to activate the securing stitches.
Deactivating the thread catcher
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Securing stitches on/off».
> Touch the switch in the lower right portion to deactivate the thread catcher.
> Touch the switch again to activate the thread catcher.
Programming the automatic thread cut
> Touch the icon «Setup Program».
> Touch the icon «Embroidery settings».
> Touch the icon «Thread cut settings».
> Touch the switch in the upper portion of the display (1) to deactivate the automatic thread cut after a
color change.
> Touch the switch in the upper portion of the display (1) again to activate the automatic thread cut after a
color change.
> Touch the switch in the lower portion of the display (2) to deactivate the automatic thread cut after
starting embroidering.
035964.50.04_2014-08_Manual_B790_EN