Bernina 790 - Sewing Straight Stitch; Securing with the Automatic Securing Program

Practical stitches
96
Stitch
patterns
Stitch
number
Name Description
33 Three Single Straight
stitches
As connecting stitches in a combination.
34 Darning stitch For darning.
5.2 Sewing straight stitch
Match the stitch length with the sewing project, such as for denim fabrics use long stitches (ca. 3 – 4
mm), for delicate fabrics use short stitches (ca. 2 – 2.5 mm). Match the stitch length with the thread size,
such as when edgestitching with Cordonnet, use long stitches (ca. 3 – 5 mm).
The straight stitch, also called step stitch, is the most used stitch.
Prerequisite:
• The Reverse pattern foot No. 1C/1D is attached.
> Touch the icon «Practical stitches».
– The Straight stitch No. 1 is selected automatically.
5.3 Securing with the automatic Securing Program
Due to a determined number of 5 stitches sewn forward and 5 stitches sewn backward, the securing is
regular.
Prerequisite:
• The Reverse pattern foot No. 1C is attached.
> Touch the icon «Practical stitches».
> Select the Securing Program No. 5.
> Press the foot control.
– The machine secures automatically.
> Sew the seam in the desired length.
> Press the button «Quick reverse».
– The machine secures automatically and stops at the end of the securing program.
035964.50.04_2014-08_Manual_B790_EN