Bernina 790 - Reversing the Stitch Sequence; Designing a Stitch Pattern from Scratch; Determining the Stitch Pattern Width

Creative sewing
91
Reversing the stitch sequence
> Select a stitch pattern, alphabet or buttonhole.
> Touch the icon «Stitch Designer».
> Touch the icon «Single point is selected».
> Touch the icon «Select all points».
> Touch the icon «Reversing the stitch sequence».
Designing a stitch pattern from scratch
> Select a stitch pattern, alphabet or buttonhole.
> Touch the icon «Stitch Designer».
> Touch the icon «Virtual sewing out».
Determining the stitch pattern width
The width of the stitch pattern is limited to 9 mm. To sew wider patterns, for example sideways motion
pattern, it is necessary to deactivate the limit.
> Select a stitch pattern, alphabet or buttonhole.
> Touch the icon «Stitch Designer».
> Touch the icon «Limiting pattern width» to deactivate the limit.
> Touch the icon «Limiting pattern width» again to activate the limit.
035964.50.04_2014-08_Manual_B790_EN