Bernina 790 - 3 Setup-Program; Sewing Settings; Adjusting the Upper Thread Tension; Adjusting the Maximum Sewing Speed

Setup-Program
53
3 Setup-Program
3.1 Sewing settings
Adjusting the upper thread tension
Alterations of the upper thread tension in the Setup Program affect all stitch patterns. Individual alteration of
the upper thread tension can also be made for currently selected stitches.
> Touch the icon «Setup Program».
> Touch the icon «Sewing settings».
> Touch the icon «Adjusting the upper thread tension».
> Move the slide using the touchscreen pen or the finger to adjust the upper thread tension.
> Touch the yellow-framed icon to reset the alteration to basic setting.
Adjusting the maximum sewing speed
> Touch the icon «Setup Program».
> Touch the icon «Sewing settings».
> Touch the icon «Adjusting maximum sewing speed».
> Move the slide using the touchscreen pen or the finger to adjust the maximum sewing speed.
> Touch the yellow-framed icon to reset the alteration to basic setting.
Programming the securing stitches
If the function is activated, 4 securing stitches are sewn automatically at the pattern start after the thread
cut.
> Touch the icon «Setup Program».
> Touch the icon «Sewing settings».
> Touch the switch using the touchscreen pen or the finger to deactivate the securing stitches.
> Touch the switch again to activate the securing stitches.
Adjusting the hovering height of the presser foot
> Touch the icon «Setup Program».
RPM
035964.50.04_2014-08_Manual_B790_EN