134
9.2 Sewing in the Quilting securing Program
Prerequisite:
• The Reverse pattern foot No. 1C/1D is attached.
> Select Quilt stitch pattern No. 1324.
> Press the foot control.
– The machine sews 6 stitches forward automatically when sewing is started.
> Sew the seam at the desired length.
> Press the button «Quick reverse».
– The machine sews 6 stitches forward automatically and stops automatically at the end of the Securing
Program.
9.3 Sewing handlook quilt stitches
Handlook quilt stitches are suitable for all fabrics and sewing projects which should look «hand sewn». It is
recommended to use a monofilament thread as upper thread and an embroidery thread as bobbin thread.
The sewing speed should be moderate to prevent the monofilament from breaking. If required, the upper
thread tension and the balance can be adjusted to the sewing project and the desired quilt stitch.
Prerequisite:
• The Reverse pattern foot No.1C is attached.
> Touch the icon «Quilt stitches».
> Select the Handlook quilt stitch No. 1328 or 1346, 1347 or 1348 or 1350.
> If required, adjust the upper thread tension and the balance to the sewing project and the desired quilt
stitch.
> Press the foot control or the button «Start/Stop» to start the machine.
035964.50.04_2014-08_Manual_B790_EN
To Next Page
Loading...
