Bernina 790 - Raising;Lowering the Needle; Spool Holder; Installing the Spool Holder

Preparation
36
> Release the foot control to stop the machine.
Raising/Lowering the needle
> Sink the heel back on the foot control to raise/lower the needle.
2.4 Spool holder
Installing the spool holder
With metallic or other special threads, it is recommend to use the swiveling spool holder and the eyelet
for metallic and silk thread (optional accessory).
The swiveling spool holder is necessary when several threads are sewn and it can also be used for bobbin
winding while sewing.
> Swivel the spool holder up as far as it will go.
035964.50.04_2014-08_Manual_B790_EN