Bernina 790 - Stitch Pattern Combination Subdivider 1; Securing a Stitch Pattern Combination

Creative sewing
85
Stitch pattern combination Subdivider 1
A stitch pattern combination can be subdivided into several sections. The subdivision is placed beneath the
cursor. Only this section is sewn where the cursor is placed. To sew the next section, the cursor must be
placed in the next section.
> Create a stitch pattern combination.
> With the touchscreen pen or the finger select the desired position within the stitch pattern combination
where the stitch pattern combination is to be subdivided.
> Touch the icon «i»-Dialog.
> Touch the icon «Editing the combination at cursor position».
> Touch the icon «Subdividing the combination».
Stitch pattern combination Subdivider 2
A stitch pattern combination can be interrupted at various sections. The interruption is placed beneath the
cursor.
> Create a stitch pattern combination.
> With the touchscreen pen or the finger select the desired position within the stitch pattern combination
where the stitch pattern combination is to be interrupted.
> Touch the icon «i»-Dialog.
> Touch the icon «Editing the combination at cursor position».
> Touch the icon «Interrupting the combination».
> Sew the first section and then reposition the fabric.
Securing a stitch pattern combination
> Create a stitch pattern combination.
> With the touchscreen pen or the finger select the desired position within the stitch pattern combination
where the stitch pattern combination is to be secured.
> Touch the icon «i»-Dialog.
> Touch the icon «Editing the combination at cursor position».
> Touch the icon «Securing».
– Every single pattern of the stitch pattern combination can be secured at the start or at the end.
035964.50.04_2014-08_Manual_B790_EN