Bernina 790 - Programming the Heirloom Buttonhole; Sewing the Manual 7-Step Buttonhole

Buttonholes
129
8.11 Programming the Heirloom buttonhole
Prerequisite:
• The Buttonhole foot with slide No. 3A is attached.
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 63.
> Sew the desired buttonhole length.
> Press the button «Quick reverse» to program the length.
– The machine finishes the buttonhole automatically. All subsequent buttonholes are sewn at the same
length.
8.12 Sewing the manual 7-step buttonhole
The length of the beads is manually determinded when sewing. Bartack, eye and securing stitches are
preprogrammed. The individual steps can also be selected by scrolling via the arrow icons, by direct selection
or by touching the button Quick reverse.
Prerequisite:
• The Buttonhole foot No. 3C (optional accessory) is attached.
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 51.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjusting the length manually».
– Step 1 in the display is activated for the buttonhole start.
> Sew the desired buttonhole length.
– The icon (2) is activated.
2
3
4
5
6
1
> Stop the machine at desired length of the bead or to the end of the length marking.
> Touch the icon (3).
> Stop at the height of the first stitch at the start of the buttonhole.
> Touch the icon (4).
– The machine sews the upper bartack and stops automatically.
> Touch the icon (5).
– The machine sews the second bead.
> Stop the machine at the height of the first bead.
man
035964.50.04_2014-08_Manual_B790_EN