Bernina 790 - Embroidering Preparation; Attaching the Embroidery Foot No. 26; Selecting the Embroidery Foot No. 26

Embroidery
145
11.5 Embroidering preparation
Attaching the Embroidery foot No. 26
> Raise the needle.
> Raise the presser foot.
> Switch the machine off and disconnect it from the power supply system.
> Push the clamping lever up.
> Remove the presser foot.
> Guide the Embroidery foot No. 26 upwards over the cone.
> Press the clamping lever down.
Selecting the Embroidery foot No. 26
After having attached the Embroidery foot No. 26, it can be selected and saved on the machine. Moreover
optional presser feet can be displayed which are available for the currently selected embroidery motif.
> Switch the machine on.
> Select the embroidery motif.
> Touch the icon «Presser foot display/Presser foot selection».
> Touch the icon «Optional presser feet» to display all suitable presser feet for the selected embroidery
motif.
> Select the Embroidery foot No. 26.
035964.50.04_2014-08_Manual_B790_EN