Bernina 790 - Deleting User Data; Deleting Data from the BERNINA USB Stick (Optional Accessory); Calibrating the Buttonhole Foot No. 3 A

Setup-Program
64
Deleting user data
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Basic settings».
> Touch the icon «Deleting data from personal memory».
> Touch the icon «Confirm» to delete all data from the personal memory.
> Touch the icon «Deleting personal embroidery motifs».
> Touch the icon «Confirm» to delete all embroidery motifs from the personal memory.
Deleting data from the BERNINA USB Stick (optional accessory)
If saved data on the BERNINA USB Stick (optional accessory) is not needed anymore, the stick can be
connected to the machine and the data can be deleted.
> Insert the BERNINA USB Stick (optional accessory) into the port (1).
1
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Basic settings».
> Touch the icon «Deleting data from USB Stick».
> Touch the icon «Confirm» to delete all data on the BERNINA USB Stick (optional accessory).
Calibrating the Buttonhole foot No. 3A
The Buttonhole foot No. 3A is calibrated to this machine and should only be used both together.
Prerequisite:
• The Buttonhole foot No. 3A is attached.
035964.50.04_2014-08_Manual_B790_EN