Preparation
43
> Touch the icon «Needle selection».
> Touch the icon «Needle type/Needle size».
> Select the needly type (1) of the inserted needle.
> Select the needly size (2) of the inserted needle.
1
2
Changing the stitch plate
The stitch plate is marked with vertical, horizontal and diagonal lines in millimeters (mm) and inches (inch).
These lines help to guide the fabric when sewing seams and precise topstitching.
> Lower the feed dog.
> Switch the machine off and disconnect it from the power supply system.
> Remove the needle.
> Remove the presser foot.
> Press the stitch plate down at the mark back right until it flips up.
> Remove the stitch plate.
> Place the openings of the new stitch plate above the corresponding guide pins and press down until it
clicks into place.
Selecting the stitch plate
After having changed the stitch plate, it can be checked whether or not it is suitable to be used together
with the selected needle.
> Touch the icon «Stitch plate selection».
035964.50.04_2014-08_Manual_B790_EN
To Next Page
Loading...
