Bernina 790 - Use of the Power Cable (Usa;Canada Only); Foot Control (Usa;Canada Only); Presser Feet

My BERNINA
25
Use of the power cable (USA/Canada only)
The machine has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the
plug in any way!
Foot control (USA/Canada only)
Use only foot controller type LV-1 with BERNINA 790.
Presser feet
Illustration Number Name Purpose Example
1C Reverse pattern foot Used to sew without
dual feed.
1D Reverse pattern foot Used to sew with dual
feed.
2A Overlock foot Overlock stitches over
the fabric edge.
3A Automatic Buttonhole
foot with slide
Used to sew
buttonholes.
4D Zipper foot Used with dual feed.
For sewing in zippers.
5 Blind stitch foot For blind stitch hems.
035964.50.04_2014-08_Manual_B790_EN