24
Illustration Name Purpose
Touchscreen pen The operation of the display is more precise when
using the touchscreen pen instead of the fingers.
Seam ripper The seam ripper is an indispensable tool to ando
stitches or to cut buttonholes open.
Height compensation
tool
The height compensation tool levels an angled
position of the presser foot sole when sliding over
thick seams.
Selection of needles The needle assortment contains different versions
and sizes of needles for all the common
applications.
Seam guide, right The seam guide is very useful as a guideline on the
right of the needle. It supports the alignment of
regular seam distances.
Screwdriver Torx, gray Use the gray screwdriver Torx to change the
needles.
Screwdriver red The red screwdriver is supplied as an all-roand tool.
Angular Torx button The angular torx screwdriver is used to open the
head frame.
Brush The brush is used to clean the feed dog and the
hook area.
Lubricator The lubricator is used to fill up the oil depots.
Power cable The power cable connects the machine with the
power supply system.
Foot control Via the foot control the machine is started and
stopped. The speed of the machine is also
controlled via the foot control.
035964.50.04_2014-08_Manual_B790_EN
To Next Page
Loading...
