117
> Make sure that the cord slides through the thread slot of the bobbin cover.
> Place the cord spool on the arm of the Free Hand System.
> Check that the cord runs smoothly.
> If the thread doesn't slide smoothly past the bobbin cover, open the cover while sewing and turn off the
bobbin thread indicator in the Setup Program.
Sewing Pintucks
The cord lies on the wrong side of the material and is hold/sewn over by the bobbin thread.
> Sewing the first pintuck.
> Place the first pintuck in one of the side grooves in the presser foot.
> Sew additional pintucks parallel.
035964.50.04_2014-08_Manual_B790_EN
To Next Page
Loading...
