Direct Streaming via Ethernet
ATEM Mini Pro and Extreme switcher’s Ethernet connector lets you stream directly while
simultaneously providing the added benefits of ATEM Software Control. You can learn more
about this powerful control software in the ‘using ATEM Software Control’ section.
Plug into your internet router via Ethernet to stream directly
You can select which platform you want to use in ATEM Software Control and set all the relevant
settings for your stream. If you are setting up a broadcast on your channel that you will regularly
use, these settings will be stored in your switcher and you can then plug into any internet
connection at any time and broadcast directly from the unit.
This section includes how to configure settings for YouTube Studio and Twitch.
TIP As you’re setting up your broadcast, it’s worth loading a standby graphic into
ATEM Software Control’s media player and switching it to the program output so you
can perform a quick test broadcast before actually going live.
To configure your settings for YouTube Studio:
1 2
Log into your YouTube account. Click the ‘go live’
icon.
If prompted, choose to start your stream ‘right
now’ or at a ‘later date’ and select ‘streaming
software’ from the options. Otherwise, select Edit
3 4
Enter your broadcast name and details. Set the
broadcast to ‘public’ so anyone can watch.
Set the child protection to the
appropriate setting and press save.
22Additional Features on ATEM Mini Pro and ATEM Mini Extreme
To Next Page
Loading...
Need help?
General
