Additional Features on ATEM Mini Pro
and ATEM Mini Extreme
ATEM Mini Pro and Extreme model switchers have additional features that give you more
options for your broadcast and even more ability to control your production directly from the
unit without the need for a computer.
Dedicated buttons on the control panel let you switch sources to the HDMI output, start/stop
streaming and start/stop recording.
ATEM Mini Pro and Extreme model switchers provide more features so you have more
control from their built in control panels plus additional streaming options
You also have the choice of streaming via the webcam output or direct streaming via Ethernet.
At any time, you can record your broadcast to an external disk via USB-C and use the dedicated
record buttons on ATEM Mini Pro to start and stop recording.
One of the most exciting additional features is the multiview. This powerful feature displays a
multiview on the HDMI video output that shows a comprehensive overview of your production.
All HDMI input sources, the program and preview outputs, plus important recording, streaming
and audio status information is presented on one screen so you always know exactly what is
happening during your broadcast!
This section describes all the additional features and how to use them.
Stream Buttons
Streaming is built into all ATEM Mini Pro and Extreme model switchers, so you don’t need to use
any complicated software to get started. Just use the included ATEM Software Control to select
what streaming service you intend to use and then enter in the streaming key. Once you have
completed this setup, you can simply press On Air to go live! There is more information in the
live streaming section of this manual.
19Additional Features on ATEM Mini Pro and ATEM Mini Extreme
To Next Page
Loading...
Need help?
General
