MFC-8220
SERVICE MANUAL
6-47
I-19 Hollow print
Possible cause Step Check Result Remedy
Paper 1 Is thick paper of more than 158
g/m
2
being used or extremely
rough surface paper?
Yes Recommend to use the
specified types of paper.
No Refer and compare with I-15.
I-20 Downward fogging of solid black
Possible cause Step Check Result Remedy
Toner cartridge
failure
1 Is the problem solved after
replacing the toner cartridge?
Yes Replace the toner cartridge.
High-voltage
power supply
PCB failure
2 Is the problem solved after
replacing the high-voltage
power supply PCB?
Yes Replace the high-voltage power
supply PCB.
User Check
(1) Check the paper used meets the recommended paper specifications.
(2) Select the ‘Thick paper mode’ in the printer driver, or use thinner paper than you
are currently using.
(3) Check the machine’s environment, conditions such as high humidity may cause
this situation to occur.