CHAPTER 2 INSTALLATION AND BASIC OPERATION
2-30
3.2.7 For Optional NC-9100h Network Interface Users (For Mac OS
®
8.6 to 9.2 Users)
(1) Make sure that the NC-9100h (Network Print/Fax Server) is installed into the MFC.
(See "Optional accessories" in Chapter 13 of the User's Guide.)
(2) Turn off and unplug the machine from the AC outlet and disconnect it from your
Macintosh
®
if you already connected an interface cable.
(3) Turn on your Macintosh
®
.
(4) Insert the supplied CD-ROM for Macintosh
®
into your CD-ROM drive.
(5) Double-click the Start Here icon to install the printer, scanner and PC-FAX Send drivers.
If the language screen appears, select your language.
(6) Click Install next to the MFL-Pro Suite for your country.
(7) After the installation is completed, restart your Macintosh
®
.
(8) Connect the network interface cable to the printer, and then connect it to a free port on
your hub.
(9) Plug the machine into the AC power outlet. Turn the power switch on.
(10) Open the Chooser from the Apple menu.
(11) Click the Brother Laser (AT) icon, and then select BRN_xxxxxx_P1.
Click Setup.
NOTE:
xxxxxx are the last six digits of the Ethernet address.
(12) Click OK, and then close the Chooser.
NOTE:
Network User’s Guide Chapter 7 on the CD-ROM.
OK:
The setup is now complete.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
