CHAPTER 2 INSTALLATION AND BASIC OPERATION
2-28
3.2.5 For USB Interface Cable Users (For Mac
®
OS 8.6 to 9.2 Users)
(1) Switch off and unplug the machine from the AC outlet and disconnect it from your
Macintosh
®
if you already connected an interface cable.
(2) Turn on your Macintosh
®
.
(3) Insert the supplied CD-ROM for Macintosh
®
into your CD-ROM drive.
(4) Double-click the Start Here icon to install the printer, scanner and PC-FAX Send drivers.
If the language screen appears, select your language.
(5) Click Install next to the MFL-Pro Suite for your country.
(6) After the installation is completed, restart your Macintosh
®
.
(7) Connect the USB interface cable to your Macintosh
®
, and then connect it to the machine.
Caution
Do not connect the machine to a USB port on a keyboard or a non powered USB hub.
(8) Plug the machine into the AC power outlet. Turn the power switch on.
(9) From the Apple
®
menu, open the Chooser.
(10) Click the Brother Laser icon you installed.
On the right side of the Chooser, select the printer to which you want to print.
Close the Chooser.
OK:
The Brother PC-FAX Send, Printer and Scanner drivers have been installed.
(11) To install Presto!
®
PageManager
®
, click Install next to the Presto! PageManager icon
and follow on the Screen instructions.
NOTE:
You can easily scan, share and organize photos and documents using Presto!
®
PageManager
®
.
OK:
Presto!
®
PageManager
®
has been installed and the installation is now complete.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
