Brother MFC-8220 - Wsw27

MFC-8220
SERVICE MANUAL
A-31
WSW27 (Function setting 5)
Selector
No.
Function Setting and Specifications
1 Not used.
2 Ringer OFF setting 0: Yes 1: No
3 Not used.
4
Detection of distinctive ringing
pattern
0: No 1: Yes
5
|
8
Not used.
NOTE:
• Selector 1 takes effect only in models/versions having a TEL key.
• Selector 4 is applicable only to the U.S.A. versions.
l Selector 2: Ringer OFF setting
This selector determines whether or not the ringer can be set to OFF.
l Selector 4: Detection of distinctive ringing pattern
If this selector is set to "1," the machine detects only the number of rings; if it is set to "0," the
machine detects the number of rings and the ringing time length to compare the detected
ringing pattern with the registered distinctive one.