APPENDIX 3 FIRMWARE SWITCHS (WSW)
A-36
WSW34 (Function setting 12)
Selector
No.
Function Setting and Specifications
1
|
5
Not used.
6
7
Number of DTMF tone signals for
inhibiting the detection of CNG
during external TAD operation
No. 6 7
0 0 : 3
0 1 : 2
1 0 : 1
1 1 : OFF
8 Not used.
NOTE:
Selectors 4 and 5 are not applicable to the American version.
l Selectors 6 and 7: Number of DTMF tone signals for inhibiting the detection of CNG during
external TAD operation
If the machine receives this specified number of DTMF tone signals during external TAD
operation, it will not detect CNG afterwards.
If these selectors are set to "1, 1," the CNG detection will not be inhibited.
WSW35 (Function setting 13)
Selector
No.
Function Setting and Specifications
1
|
8
Not used.