MFC-8220
SERVICE MANUAL
7-21
3.13
3.133.13
3.13
Paper Feed and Paper Eject Test (Maintenance mode 67)
< Function >
This function is to verify if paper is properly fed from a paper tray and properly ejected to a
paper eject tray. Please make use of it for confirmation after repair service is done.
< Operating Procedure >
(1) Press the 6 and 7 keys in this order, and "SELECT: TRAY 1" is displayed on the LCD.
(2) Press the up arrow key or the down arrow key, and the display is changed to
"SELECT: TRAY2." Select the tray to be checked using the up arrow key or the
down arrow key.
(3) Press the SET button, and "PAPER FEED TEST" is displayed on the LCD, then paper
feed and paper eject test starts. Grids as shown in the next page are printed on
paper.
(4) Press the Stop/Exit button, and the paper feed and paper eject test is cancelled, then
the machine returns to the initial stage of the maintenance mode.
Hint:
• The paper feed and paper eject test continues until paper loaded in the tray runs
out unless the STOP/Exit button is pressed.
• When paper in the tray runs out, "Check Paper" and "Reload Paper" are
displayed. When paper is loaded in the tray, the machine returns to the initial
stage of the maintenance mode.
• When the front cover is opened during the paper feed and paper eject test, error
sound beeps, and " Cover Open" and "Pls Close Cover" are displayed. When the
front cover is closed, the machine returns to the initial stage of the maintenance
mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
