MFC-8220
SERVICE MANUAL
A-35
WSW32 (Function setting 10)
Selector
No.
Function Setting and Specifications
1
|
4
Not used.
5
6
Default resolution
No. 5 6
0 0 : Standard
0 1 : Fine
1 0 : Super fine
1 1 : Photo
7
8
Default contrast
No. 7 8
0 X : Automatic
1 0 : Super light
1 1 : Super dark
z Selectors 5 and 6: Default resolution
These selectors set the default resolution which applies when the machine is powered up or
completes a transaction.
z Selectors 7 and 8: Default contrast
These selectors set the default contrast which applies when the machine is powered up or
completes a transaction.
WSW33 (Function setting 11)
Selector
No.
Function Setting and Specifications
1
|
5
Not used.
6
Report output of polled trans-
mission requests
0: Yes 1: No
7
8
Not used.
NOTE:
Selector 6 is not applicable to American versions.